Gigabyte H410M Motherboard 10th Generation

৳ 8,800.00

(1 customer review)

Supports Intel® CoreTM 10th Generation processors.
Non-ECC Dual Channel DDR4 with 2 DIMMs
8-Channel High Definition Audio Capacitors
Exclusive 8118 Gaming LAN from GIGABYTE with Bandwidth Management
The Smart Fan 5 has Hybrid Fan Headers with FAN STOP and Multiple Temperature Sensors.
GIGABYTE APP Center: Quick and Simple to Use
Design of Anti-Sulfur Resistor

Support supports Intel® CoreTM i9 processors and Intel CoreTM i7 processors and Intel CoreTM i5 processors and Intel CoreTM i3 processors and Intel® Pentium® processors and Intel CoreTM Celeron® processors in the LGA1200 package
L3 cache varies depending on CPU
(CPU Support List should be consulted for additional details.)
Chipset Intel® H410 Express
i9/i7 Intel Core processors:
DDR4 2933, 2666, 2400, and 2133 MHz memory module support
Pentium®, Celeron®, and Intel CoreTM i5/i3/processors:
DDR4 2666/2400/2133 MHz memory module support
64 GB of system memory may fit in two DDR4 DIMM slots (32 GB each DIMM).
a memory architecture with two channel
ECC Unbuffered DIMM 1Rx8/2Rx8 memory module support (operate in non-ECC mode)
Support for 1Rx8/2Rx8/1Rx16 non-ECC Un-buffered DIMM memory modules
support for memory modules with Extreme Memory Profile (XMP)
(For further details, please see “Memory Support List”).
Internal Graphics
Support for Intel® HD Graphics with an integrated graphics processor:
a single D-Sub port with a maximum 1920×1200@60 Hz resolution.
1 HDMI port that can offer a 4096×2160@30 Hz maximum resolution
* Support for HDCP 2.3 and HDMI 1.4.
A maximum of 512 MB shared memory
Audio codec Realtek®
Audio in High Definition
* You must first alter the default option in the audio software’s Device advanced settings > Playback Device before configuring 7.1-channel audio. For information on customizing the audio software, please visit the GIGABYTE website.
GbE LAN chip from Realtek (1000/100 Mbit)
Additional Slots
one slot for PCI Express x16 operating at x16
PCI Express x1 slots in two
(The PCI Express slots are compliant with PCI Express 3.0.)
supports power management protocols up to ASPM L1.2.
Storage Protocol
There is one M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x2 SSD support).
Connectors: 4 × SATA 6Gb/s
* For installation instructions for the M.2 and SATA connections, see “1-7 Internal Connectors.”
Up to ASPM L1.2 PCIe power management protocols are supported by M.2 connections.
USB 3.2 Gen 1 ports, 4 (2 ports on the back panel, 2 ports available through the internal USB header)
6 ports for USB 2.0/1.1 (4 ports on the back panel, 2 ports available through the internal USB header)
Connectors for Internal I/O
1 main power connection for ATX, 24-pin
1 × ATX 12V power connection (8 pins).
CPU fan header, one
system fan header, one
RGB LED strip header, one
Connectors: 4 × SATA 6Gb/s
M.2 Socket 3 connection, one
front panel header, one
front panel audio header, one
USB 3.2 Gen 1 header, one
USB 2.0/1.1 header, one
Only for the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module, 1 x Trusted Platform Module header
serial port header, one
1 x Jumper Clear CMOS
connectors on the back panel
a single PS/2 keyboard and mouse port
D-Sub port, one
single HDMI port
a pair of USB 3.2 Gen 1 ports
4 ports for USB 2.0/1.1
single RJ-45 port
Three audio jacks.
Controller I/O
I/O Controller iTE® Chip
Monitoring H/W
voltage measurement
temperature measurement
Fan speed measurement
temperature warning
Fan failure alert
control over fan speed
* Depending on the cooler you install, the fan speed control feature may or may not be supported.
1 128 Mbit flash drive
Using authorized AMI UEFI BIOS
ACPI 5.0, PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7
Unique Qualities
support for the APP Center
* The APP Center’s app selection may change depending on the motherboard type. The supported features of each program may also change based on the characteristics of the motherboard.

1 review for  Gigabyte H410M Motherboard 10th Generation

  1. muazcomputer


Add a review

Your email address will not be published. Required fields are marked *