3*CF 120 RGB fans and 1*RGB LED strip pre-installed and synced
Included ADD-RGB system controllable by either case button or motherboard, and compatible to other brands’ ADD-RGB products.
Large mid tower case supporting up to E-ATX(330mm) motherboard.
228mm wide tower compartment with 30mm clearance for cable management
Easy-to-install front and side panels
Quick-mounting radiator/fan holders pre-installed at the front
Supports installation of 120/140/240/280/360/420mm radiator liquid cooling system at front,
120/140/240/280/360mm radiator liquid cooling system at top, 120mm radiator liquid cooling system at rear
Removable tempered glass PSU-HDD top cover, offering top-notch lighting ambient.
Magnetic dust filters at the top, insert-in dust filters at bottom and front
Out Of Stock
|Case Type||Middle Tower|
|Product Dimensions (L×W×H)||435×222×471mm|
|Net Weight||9.39 Kg|
|Gross Weight||10.81 kg|
|5.25″ Drive Bays||0|
|3.5″ Drive Bays||2|
|2.5″ Drive Bays||4|
|Expansion Slots||7 +2|
|Cooling Fans Support||
Pre-installed: Front: 3×120mm ADD-RGB Fan Rear: 1×120mm black fan
Optional: Front: 3×140mm; Top: 3×120/140mm
|Cable Management||30mm Clearance|
|Liquid Cooler Support||Front: 120/140/240/280/360mm radiator; Top: 120/140/240/280/360mm radiator; Rear: 120mm radiator|
|Power Supply Type||ATX PS2 (maximum length: 200mm)|
|CPU Cooler Height Limit||170mm|
|VGA Length Limit||380mm (horizontal)/360mm (vertical)|
|Carton Dimension (LxWxH)||537×285×539mm|
MATREXX 70 ADD-RGB 3F is a new-concept chassis specially designed for the enjoyment of DIY. By adopting numerous novel structural designs, its architecture yields convenience and flexibility in PC building. Meanwhile 3 * RGB fans and 1* RGB LED strip are included to provide top-notch lighting effects. MATREXX 70 ADD-RGB 3F is ready to give you a boost of the gaming ambience.
The side panel is fixed with 1 groove + 2 screws design. The groove can hold the panel and prevent it from falling even with no screws mounted,which makes installation much easier. After installation, this unique fixation method will grant the glass panel even stress distribution, hence reduces the risk of cracking;
With the bottom hooked to case structure, and the top locked by a spring buckle, the front panel of MATREXX 70 ADD-RGB 3F can be released to “dismounting ready”state with just one touch. Once the “OPEN” button is pressed, the front panel will be released and held at a 5°angel, and is ready to be pulled out.
The radiator/fan holder simplifies the installation and replacement of the radiator and fan, it’s especially effort-saving when you need to install the radiator and the fan on the different sides of the holder.
In MATREXX 70 ADD-RGB 3F, DEEPCOOL creatively used tinted glass as the top cover of PSU shroud, which is pioneering in the industry.
The tinted glass can hide the power cables while reflecting the RGB lighting of your other parts, especially GPU, hence creating an infinite space visual effect. Effect Diagram of Light Bars Installed on the Power Shield (RGB Light Bars are included)
With air intake options at front and bottom, exhaust options at the top and rear, MATREXX 70 ADD-RGB 3F provides highly flexible ventilation solutions. Meanwhile the 15mm-wide front intake hole guarantees sufficient air supply, together with the low friction material applied on all meshes, the cooling efficiency is maximized.
The case’s dimensions are 484×233×492mm, offering gigantic room to manage cables (170mm motherboard tray-to-glass clearance, 30mm motherboard tray-to-back plate clearance).
Dust filters are installed at the front, top and bottom of the case.The all-round and fine coverage offers remarkable dust-proof capabilities. Meanwhile the top filter is magnetic whereas the front/bottom filters are inserted, which makes them very easy to clean.
A total of 6* 2.5’’ drives or 4*2.5’’ + 2* 3.5’’ drives can be mounted in MATREXX 70 ADD-RGB 3F. 2 SSD bays are fixed at the back of motherboard tray for quick installation. 2* 3.5/2.5’’ hard drive bays are mounted at the bottom of the case which are relocatable and removable.After removal, 2*120mm fans can be installed at the location.
The front and side panels are made of full-sized, tinted tempered glass. They display your gears with a classy filter while keeping the overall look clean .
Have question about this product? Get specific details about this product from expert.
Get specific details about this product from customers who own it.